W10300025-Changing Your Fridge Ice Mould and Heater-AP4567678, AH3407648, PS3407648

Portion range W10300025 can be observed at http://www.pcappliancerepair.com/inquiry.php?id=W10300025

The ice mildew and heater element fills with drinking water in purchase to make ice. It has a flake resistant area. You may have to have to swap your ice mildew and heater if you are observing specs in your ice.

Portion Range W10300025 replaces AP4567678, AH3407648, PS3407648

Warning: Before commencing any maintenance, usually make guaranteed that the equipment is wholly disconnected from the electric power supply by unplugging the equipment.

Equipment Needed:
- one/4th inch nut driver
- flat head screw driver

Phase-by-move how to instructions for replacing the ice mildew and heater (element range W10300025) in a Maytag Fridge:
one.)Open freezer door
two.)Remove ice maker assembly
three.)Unscrew leading two screws and the one base screw keeping in the ice maker
four.)Remove the ice maker
five.) Disconnect the wire harness
6.)Remove the shut off arm
seven.)Remove include on motor
8.)Remove the wire harness at back again
nine.)Release wire from the retainer
10.)Remove motor by unscrewing the three Phillips head screws
11.)Remove the remaining two Phillips head screws from the plate
12.)Raise out the ice stripper and ice injector
13.)Remove the drinking water fill cup by merely turning out
14.)Remove foundation plate then you are left with the ice mildew and heater
fifteen.) Reassemble

This element also functions with other made brands together with Whirlpool and Maytag.

Pay a visit to PCAppliancerepair.com to locate the element that functions for your refrigerator!

Get far more Fridge maintenance help at:


Make guaranteed to link with us!







Subscribe to our e-mail e-newsletter for far more equipment maintenance help, new solution news and far more. Pay a visit to http://www.pcappliancerepair.com and enter your e-mail tackle in the subscribe box on the aspect.

Make sure you give us a like, and subscribe to our channel!

If you have any thoughts, please come to feel absolutely free to depart a remark down below!

Post time: 08-01-2016