Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 5-7 (Complex Moulds and First Parts)



FACEBOOK: http://www.facebook.com/MAT2COMPOSITES
TWITTER: @matthieutje65
INSTAGRAM: MatthieuLibeert
WEBSITE: http://www.matthieulibeert.webs.com

Watch introduction video of this project here!

https://www.youtube.com/watch?v=Ef2nE…

Links:

VOSSCHEMIE: (vg alu epoxy) http://www.vosschemie-benelux.com
—————————————-­—————————————-­——————-

EASYCOMPOSITES: (Chemical release agent)

http://www.easycomposites.co.uk/products/release-agents/easylease-chemical-release-agent.aspx

EASYCOMPOSITES: (Prepreg)

http://www.easycomposites.co.uk/Category/Fabric-and-Reinforcement/Pre-Preg-Carbon-Fibre.aspx

EASYCOMPOSITES: (Vacuumpump) http://www.easycomposites.co.uk/products/vacuum-bagging/composites-vacuum-pump.aspx

New video online every Wednesday at 18:00 Belgian time!
Schedule:

1 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 1-7 (Introduction)

https://www.youtube.com/watch?v=Ef2nE…

8 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 2-7 (CNC+2K Paint)

https://www.youtube.com/watch?v=fWiPl…

15 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 3-7 (Casting ALU VG)

https://www.youtube.com/watch?v=WzvLM…

22 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 4-7 (Prepreg mould)

29 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 5-7 (Complex moulds)

5 February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 6-7 (First Parts and Clear)

12 February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 7-7 (Silicone bag and parts)

In this video you can see how I make prepreg complex moulds ready for a selfmade silicone vacuumbag. I also show you how to make prepreg parts out of those prepreg carbonfiber moulds made in the previous tutorial I’ve made. Why did I use prepreg to make moulds?! 1. A great way of improving my skills with prepreg 2. the mould will be suitable to use at very high temperatures for the prepreg parts coming out of the prepreg moulds (+160°C) 3. tolerances are great on shrink and stress with prepreg 4. I would be able to use fiberglass prepreg but havent found a good supplier till now. 5. The easypreg gives perfect finish for out of autoclave moulding and parts.

After the succes of a previous 6-part tutorial from mouldmaking till prepreg parts, here are some new ones! you can see the introduction of the previous tutorials by clicking on following link: https://www.youtube.com/watch?v=1PpKM…

In the videos coming online you will get some information on 2K spraypaint, How the first moulds were CNC-Milled, The use of Vosschemie VG ALU EPOXY, using Prepreg Carbonfiber to make moulds, how an other mould was made to enable silicone vacuumbags, how parts are clearcoated and many more. So if all of this sounds interesting, don’t forget to subscribe ;)

Track ID on background: Blackmill – Spirit Of Live


Post time: 04-20-2017