Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Component two-seven (3D layout – CNC – 2K spraypaint)



Fb: http://www.fb.com/MAT2COMPOSITES
TWITTER: @matthieutje65
INSTAGRAM: MatthieuLibeert
Website: http://www.matthieulibeert.webs.com

Check out introduction video clip of this project below!

https://www.youtube.com/view?v=Ef2nEStH_8E

Backlinks:
VOSSCHEMIE: http://www.vosschemie-benelux.com
CNC Complete Video clip: http://www.youtube.com/view?v=g3Y06zVvM-c

New video clip on the net every Wednesday at 18:00 Belgian time!
Plan:

one January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Component one-seven (Introduction)

https://www.youtube.com/view?v=Ef2nE…

eight January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Component two-seven (CNC+2K Paint)

https://www.youtube.com/view?v=fWiPl…

fifteen January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Component 3-seven (Casting ALU VG)

https://www.youtube.com/view?v=WzvLM…

22 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Component four-seven (Prepreg mould)

http://www.youtube.com/view?v=cJNPugX_M-c

29 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Component 5-seven (Complex moulds)

http://www.youtube.com/view?v=iclRXG6puNw

5 February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Component 6-seven (Very first Pieces and Distinct)

http://www.youtube.com/view?v=Hbq05i0Kj1Q

twelve February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Component seven-seven (Silicone bag and sections)

http://www.youtube.com/view?v=KKRlE-_Ro1A

In this video clip you can see how I make my layout from paper to CAD-computer software (Siemens Nx) to Rendering photographs in 3DS Max 2011. Soon after that you can see how Multiplex wood moulds are CNC-milled and concluded with a 2K (two element) primer spraycan.
The ending is then performed with some dry and soaked sanding beginning with grid 600 until 2000. Soon after that there is some buffing to deliver the mould to a substantial gloss, ready to be moulded with VG ALU EPOXY from vosschemie (following tutorial)

Hello Anyone, Soon after the succes of a former 6-part tutorial from mouldmaking until prepreg sections, below are some new types! you can see the introduction of the former tutorials by clicking on pursuing connection: https://www.youtube.com/view?v=1PpKM…

In the videos coming on the net you will get some facts on 2K spraypaint, How the very first moulds have been CNC-Milled, The use of Vosschemie VG ALU EPOXY, applying Prepreg Carbonfiber to make moulds, how an other mould was built to enable silicone vacuumbags, how sections are clearcoated and quite a few much more. So if all of this seems interesting, will not forget to subscribe )

Track ID on background: Blackmill – Spirit Of Live


Post time: 11-06-2016