Noise Control Solutions are often sought after when companies are trying to save large amounts of money on industrial noise reduction. Solutions are provided by many companies, and many of these solutions make use of advanced technology.
Most of these high technology solutions and other specialist control techniques are able to achieve a high noise reduction rate, which is considerably lower in cost than more common types of noise control systems.
Consequently companies offer controlling solutions that will save many thousands of pounds on the cost of industrial noise control and reduction.
Very often companies will spend and waste large amounts of money on industrial noise control, and usually the most common cause is because they failed to find the most cost effective solution. Some of the other reasons they waste money is because they are using the wrong solution or treating an inappropriate noise path or source of the noise. This means that the problem of the noise may not be dealt with, and there may be insufficient, too little or no noise reduction at all.
Companies make use of highly sophisticated noise measurement equipment, and when used alongside their considerable experience and diagnostic expertise, they can pinpoint very accurately the main sources of any noise and noise transmission pathways. This means that any money spent will be targeted to where it is most effective.
Some of the types of solutions available can include:
o Acoustic hoods
o Acoustic screens
o Noise reduction guards
o Noise absorbing wall and ceiling panels
In industry there are many different types of machines and devices which give off an extremely large volume of sound. These appliances can be very effectively dampened down.
Some of the machines and devices which are commonly noise controlled are:
o Air jets
o Blow mould machines
o Food choppers
o Hydraulic pumps
o Pipe noise
Post time: 04-10-2017