In the late 1800′s, chocolate makers already used molds made from metal. This made it possible to shape them either as flat or three dimensional. Plastic soon replaced that as these were expensive to produce making it possible for amateur chocolatiers to make these at home.
When you buy chocolate molds from the craft store, make sure that this is made from strong plastic that has intricate designs so the finished product will come out beautifully after it comes out of the freezer.
Remember that this must never be washed using soap as this can mare the taste of the chocolate. You should simply use hot water and then dry it thoroughly using a dry cloth.
Each time you use the plastic mold, make sure to wipe it clean. Greasing, spraying or dusting is not needed as this will ruin the appearance of the finished candy.
But there is an exception to that rule. If you will be mixing your chocolate with some marshmallows, candy sprinkles, jellies or cooked candies, then you must first grease or spray the chocolate mold with oiling spray. This will make the chocolate easy to remove from the mold and if you are going to make another batch, the good news is that you only have to oil spray it once.
Next thing you need to learn is how to properly put chocolate filling into the plastic sheet. For that, you use a regular teaspoon and fill each cavity with chocolate. Some of the chocolate might spill out but don’t worry because you can clean that up later on.
There may be some air bubbles trapped within the chocolate. To release it, tap the filled mold on the counter to settle the chocolate. Another way is to hold the mold horizontally then gently drop it on the counter. You will probably have to do this several times until there all the air bubbles have been removed.
When the chocolate is ready, this is the time that you put this in the freezer. This is because it is the coolest place in the house taking it less time for the chocolate to harden so you can reuse the mold if you are making another batch of chocolates.
You will know when the chocolates are ready by looking at the back side of the mold. If the cavity appears to be graying, this means that the second you turn this over, the chocolate will easily fall off to the tray.
If it doesn’t fall off on its own, you can tap it firmly. If this does not work, perhaps it needs a little more cooling time in the freezer so put it back in for a few minutes and then try again.
If you happen to have some leftovers from filling the mold, don’t throw it away because you can use it again in the future. Just wait for the chocolate to harden so you can scrape it off and then wrap it in waxed paper.
You don’t always need to make chocolate creations from molds even if this is the conventional way of doing it. The other option is to dip it in with other things like cookies or fruits so you have your own chocolate fondue as part of your dessert.
Post time: 03-06-2017