Cabinet Reworking – How to Install Crown Molding on Kitchen area Cabinets

You can set up your personal crown molding with these uncomplicated tips. With the assist of the ideal applications and fantastic options you can achieve this process by carrying out it yourself. Do it yourself crown set up is uncomplicated with these handy recommendations and techniques.

To do the very best work probable you will need some fantastic applications. Below is a listing of the desired applications miter saw, air or cordless nailer, tape measure, wooden glue, stain or paint stick. You can hire some of these applications if you will not prepare on using them once again for awhile. Get a fantastic air nailer or there are some fantastic cordless nailers on the sector. This would be a thing you could hire. The exact issue goes for the miter saw you will need a fantastic top quality saw.

Fantastic options are a must to a good finish you will need to measure your cabinets and obtain more than enough molding so you will not have any pointless splices. You can obtain already stained molding or if your staining your personal molding, you will want to obtain stain quality molding, and I would advocate getting a fantastic quality stain with polyurethane combined ideal in it to conserve some actions when ending your molding. If you are portray your molding you can obtain trim that is not good wooden, you could get finger jointed trim of trim built out of compressed wooden. Paint or stain the trim on a pair of saw horses right before chopping and hanging.

Hanging crown molding is a satisfying do it yourself job and is very best completed with two persons so that you have anyone readily available to hold the other end of the tape measure or the other end of a extensive piece of trim. With two persons you can get far more precise measurements when measuring you cabinets.

You need to slash your trim with it upside down which means the best of the trim must be down on your saw and the bottom must be up from your fence. Reduce some sample parts about twelve” extensive with an angle on a person to the ideal and a person to the still left and mark them with an R and L so you can try to remember which way you had your saw established up. Use your sample piece to hold up on the cabinets and this will assist you to know which way the saw must be established up. Commence at the aspect of a cupboard and function your way close to the kitchen area, the route seriously does not make a difference. I have found it is far better to slash your parts a shade extensive and then recut them to get that great in shape. As soon as your piece is much too tiny there is not a great deal you can do with it.

A idea to earning your corners search fantastic would be to color the edges of the trim just after they are slash, this can be completed with a very little bit of stain or paint to match your trim.

This is a job that can be completed by yourself and be very satisfying for your accomplishment.


Post time: 08-03-2016